Top 9 Vacuum Sealer Parts

0
560 reviews analysed

1. PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) – Fits FoodSaver, Seal A Meal, Weston, Cabella’s by IMPRESA

PTFE Tape/Teflon Tape for Vacuum, Hand and Impulse Sealers (1/2-inch x 30 feet) - Fits FoodSaver, Seal A Meal, Weston, Cabella's by IMPRESA

Feature

Description

NEW Made in USA

2. 4-Pack FoodSaver Gasket Replacement – Vacuum Sealer Upper Gasket Assembly – Fits V2200, V2400, V2800, V3000, V3200, V3400, V3800 Models (Corresponds to Food Saver T910-00075) – By Impresa Products

4-Pack FoodSaver Gasket Replacement - Vacuum Sealer Upper Gasket Assembly - Fits V2200, V2400, V2800, V3000, V3200, V3400, V3800 Models (Corresponds to Food Saver T910-00075) - By Impresa Products

Feature

Description

TESTED, TRUSTED AND BACKED BY OUR TOP-RATED WARRANTY AND CUSTOMER SERVICE!

PERFECT REPLACEMENT: Perfect replacement for your FoodSaver (TM) Vacuum Sealer foam gasket for models with either 1 or 2 gaskets. Installing a FoodSaver (TM) gasket replacement helps improve suction and vacuum sealing performance when Foodsaver gaskets have deteriorated

RETURNS SUCTION BACK TO 100%: Our replacement FoodSaver (TM) gasket fits all Food Saver V2200, V2400, V2800, V3000, V3200, V3400 and V3840 series models. Corresponds to FoodSaver (TM) part T910-00075. For those models with 2 gaskets, replace both at the same time for best results

BUILT TO PERFORM AT A GREAT VALUE: Our gaskets are made from a purpose-specific, tighly engineered foam blend to ensure the highest quality level. What’s more, we provide you with a pack of four gaskets to ensure that you always have spares on hand and never have to forgo the use of your machine because the gasket is out of commission

FITS MOST MODELS: Replacement for V2200 series (V2220, V2222, V2240, V2244, V2250 and others), V2400 series (V2420, V2430, V2431, V2432, V2433, V2440, V2450, V2460, V2461, V2470, V2480, V2490), V2800 series (V2820, V2830, V2835, V2840, etc.), V3000 series (V3020, V3040, etc.), V3200 series (V3240, V3250, etc.), V3400 series (V3420, V3425, V3430, V3431, V3440, etc.), V3800 series (V3810, V3815, V3816, V3817, V3820, V3825, V3835, V3840, etc.)

This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM) OEM product and Impresa Products (TM) has no affiliation with or endorsement from FoodSaver (TM). Our product is not covered under any FoodSaver (TM) manufacturer’s warranty. Brand names/logos are the registered trademarks of their owners. Use of the FoodSaver (TM) brand names, models, etc. are made solely for purposes of describing and illustrating compatibility

3. FoodSaver Upper and Lower Gasket Assembly Replacements (4 Foam Gaskets) – Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers (Replaces Food Saver T910-00075) by OutOfAir

FoodSaver Upper and Lower Gasket Assembly Replacements (4 Foam Gaskets) - Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers (Replaces Food Saver T910-00075) by OutOfAir

Feature

Description

Package Quantity:4

If your FoodSaver vacuum sealer is having trouble holding suction while sealing, our gaskets may be able to help you. These gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)

Works With These Models:

  • V2200 Series
    • V2000
    • V2220
    • V2222
    • V2235
    • V2240
    • V2244
    • V2250
    • V2254
    • V2260
  • V2400 Series
    • V2420
    • V2430
    • V2431
    • V2432
    • V2433
    • V2440
    • V2450
    • V2460
    • V2461
    • V2470
    • V2480
    • V2490
  • V2800 Series
    • V2820
    • V2830
    • V2835
    • V2840
    • V2860
    • V2865
  • V3000 Series (Lower Gasket Only)
    • V3020
    • V3040
  • V3200 Series (Lower Gasket Only)
    • V3230
    • V3240
    • V3245
    • V3250
  • Others
    • GameSaver Deluxe Plus

4. FoodSaver Repair Kit: Upper/Lower Gasket, Heat Strip Replacement 4 Foam Gaskets, 2 Strips Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers Replaces Food Saver T910-00075 by OutOfAir

FoodSaver Repair Kit: Upper/Lower Gasket, Heat Strip Replacement 4 Foam Gaskets, 2 Strips Fits V2200, V2400, V2800, V3000, V3200 Series Vacuum Sealers Replaces Food Saver T910-00075 by OutOfAir

Feature

Description

Is your FoodSaver vacuum sealer having trouble holding suction while sealing? Our gaskets may be able to help. Our gaskets replace the foam gasket(s) in your FoodSaver. If your FoodSaver has 2 foam gaskets you should replace both of them. If you have one foam and one rubber gasket, you should only need to replace the foam gasket. Please check that your foam gaskets are able to be removed from your sealer, some are glued in place and not meant to be removed (you can still do so, but you must be careful not to leave any residue after removal)

Works With These Models:

  • V2200 Series
    • V2000
    • V2220
    • V2222
    • V2235
    • V2240
    • V2244
    • V2250
    • V2254
    • V2260
  • V2400 Series
    • V2420
    • V2430
    • V2431
    • V2432
    • V2433
    • V2440
    • V2450
    • V2460
    • V2461
    • V2470
    • V2480
    • V2490
  • V2800 Series
    • V2820
    • V2830
    • V2835
    • V2840
    • V2860
    • V2865
  • V3000 Series (Lower Gasket Only)
    • V3020
    • V3040
  • V3200 Series (Lower Gasket Only)
    • V3230
    • V3240
    • V3245
    • V3250
  • Others
    • GameSaver Deluxe Plus

Is your machine having trouble sealing bags closed? If so, our replacement heat strip tape could help. Over time this tape can get worn out or dirty which can cause problems when the machine tries to seal the bags. Includes instructions for replacing the heat strip/tape.

5. 3 Teflon FoodSaver Replacement Strips for Vacuum Sealers – Fits FoodSaver, Rival Seal-A-Meal, Weston, Cabella’s and Nesco Models – Made in the USA

3 Teflon FoodSaver Replacement Strips for Vacuum Sealers - Fits FoodSaver, Rival Seal-A-Meal, Weston, Cabella's and Nesco Models - Made in the USA

Feature

Description

(3) 18″ x 0.5″ IMPRESA Teflon strips with adhesive backing. Fit virtually all FoodSaver series, including 2000, 3000, 4000, 5000, GameSaver and Professional, as well as virtually all Weston, Cabella’s, Nesco and Rival Seal-A-Meal models. Replaces deteriorated or burnt-out Teflon tape, which is a crucial barrier between the heating element and the vacuum bag. Old tape causes poor bag sealing and can lead to a broken heating element and a broken sealer. Strips are slightly wider and longer than necessary, allowing you to easily cut them down to the perfect size for your model. Strips should be replaced when they appear warn, discolored or if sealing isn’t perfect. Peel and stick backing makes our vacuum sealer tape easy to apply. Simple-to-follow instructions included with package. Over the wire for vacuum sealers, under the wire for impulse sealers. Great for Weston Pro 2100, 2300 and more. Perfect piece of the solution when looking for replacements for FoodSaver (TM) parts, FoodSaver (TM) teflon / teflons for FoodSaver (TM) / Food Saver (TM) teflon tape / FoodSaver (TM) teflon tape, Rival Seal A Meal (TM) parts, etc. This is a generic product manufactured and distributed by Impresa Products (TM). This is not a FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) OEM product and Impresa Products has no affiliation with or endorsement from FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM). Our product is not covered under any FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) or Rival Seal-A-Meal (TM) manufacturer’s warranty. The FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names and logos are the registered trademarks of their owners. Any use of the FoodSaver (TM), Weston (TM), Cabella’s (TM), Nesco (TM) and Rival Seal-A-Meal (TM) brand names, models or any other related designations are made solely for purposes of describing and illustrating compatibility.

6. 2-Pack: 12" inch Impulse Sealer ???? Heating Element Service Spare Repair Parts Kit PFS-300 FS-300 PSF-300 PSF300 F-300

2-Pack: 12" inch Impulse Sealer ???? Heating Element Service Spare Repair Parts Kit PFS-300 FS-300 PSF-300 PSF300 F-300

Feature

Description

This heating element fits most, but not all, impulse sealing machines that are advertised as “12-inch” machines or have “300” as part of their model number. Actual length of this heating element is 340mm / 13.4in. The coloring of the cloth varies a little from batch to batch. The ones you receive may be slightly darker or lighter in color. Dozens of manufacturers of these machines use the exact same model numbers but some machines do have some differences that make this heating element incompatible. If this does not fit your machine, please don’t leave a poor review as it still fits most machines. Instead consider leaving a review listing your brand and model of machine that it didn’t work with. You’ll be helping me out and your fellow shoppers to know which exact machines are not compatible. Thank you ????

7. Weston Pro-2300 Commercial Grade Stainless Steel Vacuum Sealer (65-0201), Double Piston Pump

Weston Pro-2300 Commercial Grade Stainless Steel Vacuum Sealer (65-0201), Double Piston Pump

Feature

8. PTFE Tape/Teflon Tape for Vacuum Sealer Machine,Hand and Impulse Sealers (1/2-inch x 33 Feet)-Fits FoodSaver, Seal A Meal, Weston, Cabella’s and Many More

PTFE Tape/Teflon Tape for Vacuum Sealer Machine,Hand and Impulse Sealers (1/2-inch x 33 Feet)-Fits FoodSaver, Seal A Meal, Weston, Cabella's and Many More

Feature

Description

Size:1/2-inch x 33 feet

Widely Application:
Our Teflon Tapes fit for virtually all FoodSaver, Weston, Cabella’s, Nesco and Seal-A-Meal vacuum sealers, as well as most models of hand / impulse heat sealers.
►Used for packing food, dairy products, medicine, hot sealing and sticking parts

►Use the thermal seal of plastic film

►The surface of the pressure roller used for package dyeing and resin processing

►Roller surface used for packing adhesive and coating machine

►Used for sealing the friction surface of feeding hopper and guide

With normal usage the tape protecting the heating element in most vacuum sealers doesn’t need to replaced as often as the gaskets, but if you are having issues with your bags not staying vacuum sealed, you may want to consider replacing the tape as it can help with inconsistent sealing.

How Do I Install My Replacement Tape?
To install:
1) Simply remove the tape on your current heating element (make sure to get the residue from the old tape off).
2) Cut your new Out Of Air replacement tape to the correct size.
3) Remove the yellow backing from the tape and place over the heating element (under the element if using for an impulse sealer). Smooth out the tape with your finger as you go, to ensure a good bond.
And that’s it!

Will Out Of Air replacement tape work with my machine?
Yes it will. Works in all Vacuum and Impulse sealers that have a heating element for sealing bags.
For Vacuum Sealers you should place the tape directly over the heating element (after removing the current tape).
For Impulse Sealers you should place the tape directly under the heating element (after removing the current tape).

Good for DIY, it will be your super assistant and very helpful!

Specification:
Thickness:0.005-inch
Wide:1/2‘’ ,3/4‘’,1‘’ ,2‘’,4‘’ can choose
Length:33 feet
Tape resistant temperature:-148℉~518℉(-100℃~270℃)
Package:
1 x Teflon tape

9. Weston Vacuum Sealer Pro Series Maintenance Kit (08-0501-W), Part Kit for 65-0101, 65-0201, 65-0401-W

Weston Vacuum Sealer Pro Series Maintenance Kit (08-0501-W), Part Kit for 65-0101, 65-0201, 65-0401-W

Feature

Conclusion

By our suggestions above, we hope that you can found Vacuum Sealer Parts for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general