Finding your suitable readers for sata to pata adapter for laptop is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for sata to pata adapter for laptop including detail information and customer reviews. Let’s find out which is your favorite one.
941 reviews analysed
1. AGPtek SATA/PATA/IDE Drive to USB 2.0 Adapter Converter Cable for Hard Drive Disk HDD 2.5" 3.5" with External AC Power Adapter
- ◆ USB 2.0 to 2.5″ 3.5″ IDE SATA HDD Hard Drive Converter Adapter Cable + AC Power Adapter, Supports SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.) External power adapter included, for power up the 5V/12V IDE/ATAPI devices usage.
- ◆Use your 2.5″ / 3.5″ IDE hard drive or SATA hard disc as an external hard drive. Connect your ide to usb adapter to your computer through a USB port. 480 MB/s high speed transfer rate (USB 2.0 specification), limit depend on the IDE device/SATA device and the driver.
- ◆ Connect to the IDE device using USB interface and SATA device too. USB 2.0 standard, 480M bps full speed.
- ◆ AGPtEK sata to usb adapter can be easily connected to the IDE device / SATA device and make the hard disk device more portable.
- ◆ This usb sata ide adapter is easy to use and plug & play, no drivers needed.
2. 2.5 Inch IDE to SATA Adapter, Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port
- One 22 Pin male SATA connector，One 44-Pin standard female IDE connector.
- IDE to SATA Adapter. The 44-Pin IDE 2.5″ HDD to SATA Adapter can allow you use your laptop 2.5″ IDE hard disk as SATA disk. You can use your 2.5″ IDE hard disk in the laptop or desktop which have SATA connector.
- Adapter is good for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD.
- Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.
- Dimensions: 2.72″ x 0.55″ x 0.69″.
3. Laptop SATA to IDE Adapter, Convert 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port, Parallel Type
- 2.5″ SATA Hard Drive to IDE 44 Pin Adapter for Laptop Drives.
- Serial SATA To IDE bridge board, Output interface 44 pin IDE.
- Great for computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives
- Adapter is good for up grading an old computer with 2.5 inch SATA HDD to a new 2.5 inch IDE HDD.
- 44 Pin IDE connector powers the Drive no other cables or adapters are needed. No driver needed, plug and play.
Laptop SATA to IDE Adapter, Convert 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port, Parallel Type
4. SATA/IDE to USB 3.0 Adapter, UNITEK IDE Hard Drive Adapter for Universal 2.5"/3.5" Inch IDE and SATA External HDD/SSD with 12V 2A Power Adapter, Support 10TB
- [Universal IDE Hard Drive Adapter] Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5″/3.5″ HDD up to 10 TB, IDE 2.5″/3.5″ HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously.
- [Stable Power Supply] Included 12V 2A power cable is for providing stable electricity supply. 4PIN Power Cable is designed for 3.5’’ IDE drive.
- [Superspeed USB 3.0] Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS.
- [Driver Free] Plug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. On/Off Switch for HDD protection. LED light shows Power and Activity status.
- [What We Offer] SATA/IDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1
- 2-year warranty quality guarantee, 24h-friendly customer service and email support.
5. IDE Adapter Cable, FIDECO USB 3.0 to SATA Adapter Hard Drvie Converter IDE Cable for 2.5"/3.5" IDE and SATA III HDD SSD Drives, 5.25-Inch DVD-ROM/CD-ROM/CD-RW/DVD-RW/DVD+RW (IDE Cable PL03)
- Support Multiple Drives up to 10TB: This converter can support up to three drives simultaneously, it is compatiable with 2.5“/3.5” SATA HDD SSD
- 2.5“/3.5” IDE HDD SSD
- 5.25’’ DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW. Support 2x 10TB hard drives, is a perfect solution for backup & processing IT data, batch processing data, formatting, file transfers, data recovery, etc.
- Humanization Design: Compact body design, versatile function, enables access to three drives simultaneously. LED process indicator, support Plug and play & hot swap, On/Off power Switch for Hard drives protection.
- Pulg & Play: Quickly connect 2.5/3.5 inch SATA/IDE HDD SSD to a USB port via this portable cable without any extra power and installation. There is no need for anything else. Just plug this into the device and you’re good to go.
- 5Gbps SuperSpeed: USB 3.0 supper speed supports transfer rates of up to 5Gbps (The actual transmission speed is limited by the setting of the device connected). Backwrds compatible with USB 2.0/1.1 connections.
- System Compatibility: This IDE Sata Adapter is universally compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac OS 9/ 10, Linux etc. We Support Best Seiver: 18 months warranty, 24h friendly customer service and email.
1. Super-Speed USB 3.0 interface, Reverse compatible with USB 2.0 and USB 1.1. LED lights indicate Power and Activity status.
2. On/Off Switch for HDD protection, can be switched off when not in use, easy and simple operation, efficiently enhances lifespan of your devices it can protect your HDD.
3. Support Standard Desktop 3.5″ SATA or IDE Hard Drives, Standard Notebook 2.5″ SATA or IDE Hard Drives, Desktop CD-ROM/CD-R/CD-RW/DVD-ROM/DVD+RW.
4. Hot-swappable, plug and play, no drivers needed.
5. The USB SATA Adapter is a caseless solution that makes swapping hard drives easier than ever before. Transfer data quickly and easily through USB 3.0 at speeds of up to 5Gbps.
– Available USB port on the computer.
– Windows: 2000/XP/Vista/7/8/8.1/10 (Both 32-bit and 64-bit versions).
– Mac OS X.
1x USB 3.0 to IDE/SATA Adapter
1x USB 3.0 CABLE
1x 4PIN Power Cable
1x 12V/3A Power Adapter
1x User Manual
6. SATA PATA IDE Drive to USB Adapter Converter Cable for Hard Drive Disk HDD SSD 2.5" 3.5", USB 2.0 with AC Power, Internal to External Laptop File Data Transfer Reader Kit, Recovery Conversion Cord
- COMPATIBILITY — SUMBLIME SATA to USB adapter is compatible with all existing IDE, ATAPI devices such as a CD-ROM, CD-RW, DVD-ROM and 2.5”/ 3.5” IDE & SATA hard drives. Complies with ATA, ATAPI-66 Specification 1.0. Our hard drive to USB adapter supports Windows 98/ME/2000/XP/Vista and Mac OS.
- APPLICATION — Our SATA to USB adapter turns any standard IDE or SATA drive into a convenient external drive. You can connect to an external drive to add storage, perform backups and transfer files to your computer. This hard drive to USB adapter is so portable that you can tuck it away in a laptop bag.
- HIGH SPEED TRANSFER RATE — high speed transfer rate up to 480 MB/s with USB 2.0. Limit depend on the IDE device/SATA device and the driver.
- USB INTERFACE — The SATA to USB adapter fits USB 1.1, USB 2.0, USB 3.0. Full speed is 480 MB/s. (Backward compatible with USB 1.1)
- EASY TO USE — plug & play, no drivers needed. This SATA to USB adapter comes with an external power supply in case you do not have sufficient power from the computer. For power up the 5V/ 12V IDE/ ATAPI devices.
When your old computer started to die. SUMBLIME SATA to USB adapter is greatly helpful for you to transfer files from the old computer to your new one. Then you have all your files on your new computer. Also, it turns any standard IDE or SATA drive into a convenient external drive. Plug and play. No driver needed. The hard drive was spinning up and info was being sent out.
1. Confirm device is under master mode.
2. Connect SATA/ IDE connector to SATA/ IDE device.
3. Connect AC power to SATA/ IDE device.
4. Connect cable to USB port of computer.
1. Window98: Insert Driver CD to CDROM and run X:\win98\setup.exe before you insert the cable to your computer.
2. Windows2000/ ME/ XP: You don’t need to install any driver.
3. Mac 8.6 or higher: Copy Fene USB SATA/IDE_05E3_0702. sit to desk to desk to pand double click it to get driver file. Then copy the driver file to [System Folder][Extensions]. After that, connect cable to computer and reboot the system.
1. USB to SATA/ IDE cable: used to connect SATA/ IDE device to computer with USB port.
2. Power with 12V and 5V double channel output: used to supply power to SATA/ IDE device.
1. USB to IDE/ SATA cable
2. SATA Cable/ SATA Power Connector
3. Power Adapter (AC110V-240V)
4. Power Cord
7. Warmstor SATA/PATA/IDE Hard Drive to USB 2.0 Adapter Cable Support All Computer System, 2.5” / 3.5” Hard Disk HDD Connector Converter Set with [Updated Version] Stable AC Power Supply
- Economic Hard Drive Connectors Set: USB 2.0 to 2.5″ 3.5″ IDE SATA Hard Drive Adapter Cable + AC Power Adapter + SATA Power Cables + SATA Connecting cable, Support SATA Hard Disk / ATA/ATAPI CD-ROM/R/RW DVD-ROM (based on ATAPI spec.)
- USB 2.0 specification: MAX 480Mbps(60M/S) high speed transfer rate limited depending on your hard drive and computer USB port standard
- Newest Upgraded Power Supply: more stable performance and higher quality,max 10 TB hard drive supported
- Easy to use and plug & play, no drivers needed!Please have a look at the product description below to get the using instruction
- IMPORTANT NOTE: You MUST NOT connect the power adapter and the 4-pin SATA power cable with force in reverse side! Please refer the fifth picture to get the right method!
●Hard Drive Support: 2.5/3.5 inch SATA I/II/III, IDE Hard Drive, CD-ROM/R/RW DVD-ROM
●Plug & Play,no additional driver needed
●System support: All computer system supported
●Transfer Speed: USB 2.0 specification Max 480 Mbps (60M/S), limited depending on your hard drive and computer USB port standard
●SATA/IDE Cable Length: 20 Inch
●Newest Upgraded Power Supply(AC110V): more stable performance and higher quality,max 10 TB hard drive supported. Comes with safer three-pin plug power cable
*USB Port supports: PC, Hard Drive Player, Set-Top Box(STB), Smart TV and more
*Support connecting a IDE & a SATA HDD at the same time
√Easy to Install:
1. Comfirm device is under master mode.
2. Connect SATA/IDE connector to SATA/IDE device.
3. Connect AC power to SATA/IDE device.
4. Connect cable to USB port of computer.
●1.If you need an Instructions,please watch this video by this direct link: https://youtu.be/ZS-xTR7Puu8
●2.IMPORTANT NOTE: You Must not connect the power adapter and the 4-pin SATA power cable with force in reverse side! Please refer to the Model shape then insert connector correctly just as the details shows in the fifth product picture!
●3. When you use this adapter to get data from an old HDD,you should remove the drive from the old computer firstly.
♥We offer 30 Days no-worry refund & 2 Years no-worry Warranty.Please just purchase it without worry!
♥Any questions you have, please feel free to contact our Warmstor Customer Service by Amazon message or send mail to [email protected]
●1x USB to SATA/PATA/IDE Cable
●1 x Power Supply(Updated Version)
●1 x Three-pin plug power cable (US regulations)
●1 x SATA data cable
●1 x SATA power adapter cable
8. CY mSATA Mini PCI-E SATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure White for Notebook Laptop
9. Tan QY Laptop SATA to IDE Adapter, 2.5 Inch Serial ATA HDD Hard Disk Drive or SSD to 44 Pin Male PATA Port Converter (Vertical Type)
- SATA hard drive can be detected and used as a standard 2.5″ IDE hard drive.
- Converts all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD into 2.5″ IDE device.
- Allows to connect a 7+15P SATA hard drive to a 44P IDE connector.
- 7+15 Pin female design allows to connect directly to SATA hard drive without cables.
- Complete hardware solution
- no driver installation is required. Compatible with any OS such as: Windows, DOS, Mac, Linux, etc. that support IDE/ATAPI storage devices
SATA hard drive can be detected and used as a standard 2.5″ IDE hard drive.
Converts all SATA type devices CD-ROM/CD-RW/DVD-ROM/DVD-RAM/DVD-RW/HDD into 2.5″ IDE device.
Allows to connect a 7+15P SATA hard drive to a 44P IDE connector 7+15 Pin female design allows to connect directly to SATA hard drive without cables.
One SATA 7+15P female connector for connecting to SATA hard drive.
One IDE 44P male connector for connecting to 44P IDE connector.
Compliant with Serial ATA specification revision 1.0.
Supports Serial ATA data transfer rate up to 1.5Gb/s (150MB/s).
Easy install & no driver required.
Super compact design & no space wasted.
PCB size: 69mm x 14mm.
Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux.
1 x SATA Female to 2.5″ IDE Male Adapter
By our suggestions above, we hope that you can found Sata To Pata Adapter For Laptop for you.Please don’t forget to share your experience by comment in this post. Thank you!