We spent many hours on research to finding replacement hardware kit for office chair gas lift, reading product features, product specifications for this guide. For those of you who wish to the best replacement hardware kit for office chair gas lift, you should not miss this article. replacement hardware kit for office chair gas lift coming in a variety of types but also different price range. The following is the top 10 replacement hardware kit for office chair gas lift by our suggestions
980 reviews analysed
1. Replacement Hardware Repair Kit for Office Chair Gas Lift Cylinder – S4451-K
- Hardware repair kit for office chair gas lift cylinders
- Contains: 1 Rubber Bumper, 1 Silver Washer, 2 Black Washers, 1 White Bearing Pack, 1 Retaining Clip
- Attachment hardware for lower area of office chair gas lift pneumatic cylinder
- These parts fit the large majority of standard gas lift cylinders in office chairs – Most but not all
- Note: Gas lift piston in picture is for visual purposes only and is not included. Only the hardware kit is included.
2. #1 Office Chair Cylinder Replacement – Includes Removal Tool, Instructions & Gloves – Heavy Duty Gas Lift Hydraulic/Pneumatic Piston – Fits Most Herman Miller Aeron & Universal Standard Size
- ★ EASY REMOVAL & INSTALLATION – The only chair cylinder replacement on Amazon to offer a cylinder removal tool. No more struggling and spending hours trying to remove your chairs old broken cylinder with tools you don’t have. We will also make sure to help guide you through the entire process from start to finish.
- ★ SAVE MONEY. REVIVE YOUR CHAIR – Fix your sinking office chair by replacing the cylinder instead of spending money on a brand new computer chair. We’ll send you the highest quality cylinder on the market, our exclusive cylinder removal tool, detailed step-by-step installation instructions, gloves, and our money-back guarantee. You have nothing to lose!
- ★ INDUSTRY STANDARD SIZE – This pneumatic piston cylinder will fit almost every office chair on the market. If it doesn’t fit your specific chair, return it for a full refund and we’ll even cover the cost of shipping for you.
- ★ EXTRA HEAVY DUTY & THE BEST ON THE MARKET – Our desk chair cylinders are all Class 4, which are known as the most durable, longest lasting, & highest quality gas lift cylinders. Cheaper options can start sinking within the first few months of use. Our’s don’t. They can even support up to 1000 lbs without fail.
- ★ 6 YEAR HASSLE-FREE WARRANTY – Our goal is to provide you with the highest quality office chair parts so you can extend the life of your chair. So if for some reason our cylinder fails, leaks, or starts sinking – email us, and we’ll send you a brand new one. Our warranty lasts for up to 6 years from your purchase date.
3. zitriom Office Chair Gas Lift Cylinder Replacement – Heavy Duty Hydraulic and Pneumatic Shock – Fits Most Executive Chairs Color Black Universal Size
- ✅ HEAVY DUTY CHAIR REPLACEMENT – Made of the highest quality materials to hold great weights and provide durability
- tall center support column
- ✅ UNIVERSAL SIZE OFFICE CHAIR – Universal spare to fit most executive, computer and desk chairs sold across the US and Canada
- ✅ TOTAL LENGTH – 15 inches Height fully extended, 10 inches minimum extended, 2 inches wide, stroke extension 1.1 inches
- ✅ 5 YEARS WARRANTY SATISFACTION GUARANTEE – 100% money back if you are not satisfied – No questions asked
4. Replacement Chrome Swivel Office Chair Gas Lift Cylinder Pneumatic – Standard Height – S6133
- 2″ (50mm) wide x 9.25″ (235mm) tall chrome main support column that will fit most chair bases
- 5″ piston stroke adjustment range (up & down)
- 16.33″ (415mm) total overall length when extended
- Ideal to replace gas cylinders on most standard office chairs, task chairs, executive chairs, and more.
These cylinders are a very common standard height and adjustment range for average office chairs. Great for replacement of old or worn out gas lift cylinders on chairs that are in otherwise good condition. Always remove gas lift cylinders with care and never heat or puncture.
5. (#108) Gas Cylinder Bearing Kit
6. Replacement Universal Office Chairs Gas Lift Cylinder – 11.4 to 16.3 inch Adjusts (Black)
7. OFFICE FACTOR, Office Chair Gas Lift Cylinder, FITS 2 INCHES Bases ON The Center, Heavy Duty 330 LBS Weight Capacity, Highest END Class 4, (Black)
8. Gas Cylinder Heavy Duty for Herman Miller Classic Aeron Chair as Replacement
- Listing is for a brand new never used CLASS 4, office chair seat height adjustment pneumatic gas lift cylinder. 4.5″ stroke (seat travel from lowest to highest settings).
- Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it’s load capacity is 350 pounds.
- Length Compressed: 11.5″ Fully Extended: 16″ Travel: 4.5″, Cylinder Diameter: 28mm (1.1″) Column Diameter: 50mm (approx 2″)
- After install, If the chair can’t lift normally. Two screws located near where the cable attaches need to be adjusted, see photo 2.
- Cylinder for Aeron Chair Size A, B and C, offer 5 years replacement warranty.Only For Aeron chair made between 1996-2012.
Package Include: 1 x gas cylinder(chair not included.)
Samhongsa was founded in 1971, is a professional production and sales of Cylinder for office chair. Samhongsa have advanced production equipment and testing equipment and improved management system. Samhongsa always insist on the operation idea of “human-oriented, honesty first, lean management and excellence” Providing perfect quality and service for users and possess the good reputation. Samhongsa’s cylinder have acquired and through eight world standards certifications(Such as: BIFMA；LGA；TUV；SGS, ect.). Samhongsa have built a friendly, long-term with Herman Miller, Allsteel, Steelcase, HON, etc. world-renowned brands.
Only For Aeron chair made between 1996-2012.
9. Chair Saver The Kit – Fix Your Sinking Office Chair in Under A Minute!
- Free shipping for prime and non-prime members in the USA and reduced shipping for our international customers
- Maintains the height of an office chair when the adjustable cylinder fails and installs in under a minute!
- Inexpensive, easy to use, ergonomic with no chair disassembly or tools required
- Universal fit, 30 day satisfaction guarantee and 5 year warranty – you won’t get that with any replacement cylinders
- Small businesses save 10% when you buy 10 or more kits and 20% when you buy 50 or more! Promotion is applied at check out
10. Heavy Duty Replacement Office Chair Swivel Tilt Control Seat Mechanism w/ 6" x 10.2" Mounting Holes – S2979-HD
- Heavy duty replacement office chair tilt mechanism with 10.2″ long x 6″ wide screw mounting hole pattern
- Heavy duty – rated up to 500 lbs.
- Single lever for gas cylinder height activation – Accepts standard tapered gas lift cylinders
- Tilt control – push lever in to lock tilt, pull out to unlock
- Twist hand wheel to tighten or loosen (adjust) backward tilt tension
By our suggestions above, we hope that you can found Replacement Hardware Kit For Office Chair Gas Lift for you.Please don’t forget to share your experience by comment in this post. Thank you!