977 reviews analysed
1. Secura 9100MC 1800W Portable Induction Cooktop Countertop Burner, Black
- 15 power levels from 200-1800Watts
- 15 temperature range from 140 Degree Fahrenheit to 460 Degree Fahrenheit
- Digital control panel
- Lightweight and compact for easy handling and storage
- Built-in count-down digital timer with 1 min increments up to 170 minutes
- The auto-pan detection
- Equipped with diagnostic error message system, Low and high voltage warning system
- REQUIRES INDUCTION COMPATIBLE MAGNETIC COOKWARE. Compatible with Duxtop and other induction ready cookware such as cast aluminum enameled iron and steel, stainless steel with a magnetic bottom, or cast iron
- Product Built to North American Electrical Standards, 120V 60Hz AC
- 2-year warranty
- ETL approved
2. INDUCTION INNOVATIONS – Mini-Ductor 7/8" Flat Pre-Formed Insulated Induction Coil
- The 7/8″ Pre-Formed Coil (MD99-632), an I.D. heat resistant pre-formed coil for the Mini-Ductor series. Includes: One (1) 7/8″ I.D. heat resistant pre-formed coil (8.00″ LX 1.125″ O.D.) (1.8 oz.)
- LONG-LASTING LIFESPAN: This coil lasts for several hundred uses or more subject to use – avoiding abrasion and overheating prevents premature wear to the coil.
- INSULATED FOR SAFETY: The coil insulation is coated to resist abrasion but, if insulation is breached, a new coil will need to be used.
- FLEXIBLE COILS: The coil is flexible and can be bent or separated for a variety of applications. To use around corners or buried deep near plastic or rubber, simply bend to your desired configuration.
- PLATED AND PROTECTED: All coils are plated to eliminate oxidation and guarantee contact.
Induction Innovations, Inc. is a family-owned and operated manufacturer of high-performance induction heaters. Our headquarters and all manufacturing is located in Elgin, Illinois, just west of Chicago. Our flameless heating tools have been designed to solve problems, such as how to remove stuck or corroded parts and adhesives, auto glass, body moldings, seam sealers, and more – safely, speedily and with control.
Experience Invisible Heat
You can increase your profits with our flameless heat tools. There’s no longer any need to use a potentially dangerous torch or open flame to remove parts. This method is unreliable, time-consuming, and can damage the area around the part – all of which affect productivity and, ultimately, the profits you make. Using oxygen-acetylene in a vehicle and equipment repair facility is hazardous, and insurance premiums are high to cover the risk of an accident. Using our induction heating tools eliminates the risk of using open flames and can result in insurance premium reductions.
Purchase the 7/8″ Pre-Formed Coil (MD99-632), an I.D. heat resistant pre-formed coil for the Mini-Ductor series.
Includes: One (1) 3/4″ I.D. heat resistant pre-formed coil (8.00″ LX 1.125″ O.D.) (1.8 oz.)
3. Induction Heating Bolt Remover Tool – Handheld Bolt Buster Gun, Induction Bolt Heater Tool Kit
- * EASY TO USE just plug in and use the tool on stubborn rusted bolts until they get cherry red hot.
- * GREAT THING TO HAVE an induction bolt heater in your tool box, takes all the fight out of the job.
- * SAFER AND CLEANER by replacing torches, it greatly reduces the risk of accidents and potential damage.
- * GREAT TOOL for many situations, there are always rusted nuts and bolts on older machinery, equipment you are trying to repair. Stop breaking good tools trying to break free bolts.
- * PURCHASE GUARANTEE please contact us to return or refund within 30 days if the products get any defects or damages when you receive it, or the goods is damaged or unusable due to quality problems during use.
Why Choose the WOYO HBR:
Every technician knows that in the repairing process the removal of the seized nuts and bolts can be time consuming work . The traditional way is to use a torche but open flame can be dangerous. With the WOYO heating bolt remover, with flameless heating, you can quickly and easily perform damage free parts removals.
– Easy to use, you will need only 3 minutes to master
– Green, Safety, Flameless
– It is equipped with two LED lights for narrow and dark spaces
– It will not damage the bolt or the material around the equipment.
– It is a flameless tool that can quickly and easily loosen rusted bolts.
– More coils are available. Each line is suitable for the size of different types of bolts.
– You will need 60 seconds to reach 400°C
Model: HBR012 / HBR110
Input voltage: 12V / 110V 50/60Hz
Input current: 40A / 7A
Output power: 500W / 500-900W
Output voltage: 40V / 45V
Output current: 120A / 180A
Woyo HBR Mainset*1
1m Flexible Soft Coil*1
bore diameter 18mm coil*1
bore diameter 22mm coil*1
bore diameter 28mm coil*1
4. Micro USB Cable, 6 Feet Extra Long Nylon Braided High Speed Durable Android Charger Cable, Fast Charger Cord, for Samsung Galaxy S7 Edge S6 S5, Note 5 4,LG G4 Stylo 3, PS4, Camera, MP3 – 2 Pack
- Universal Compatibility : Extra long micro USB cable for Samsung Galaxy S7/S7 Edge/S6/S6 Edge/S5/S4/Note 5/4, Samsung Tablets/Tab, PS4 controller/Dual Shock 4/Xbox One Controller, Windows Phones, LG G4/G4 Stylus/G3/G3 Stylus/K40/K30/Tribute Empire, Huawei Honor 7X/6X, Motorola, Google Nexus, Blackberry, Sony, HTC, Nokia, ZTE, Blackberry Aurora/DTEK50/Leap/Z3/Z30/Z10, wireless keyboards, GPS devices, Bluetooth speakers, HP, MP3, Camera, printers, E-readers. Supports most Android Devices.
- Fast Charging & Sync : Micro USB Cables, A Male to Micro B, USB 2. 0 supports 480 Mbps transmission speed and charging speed up to 2. 4 Amp, Oxidation resistance ensures a safe rapid charging by any USB charger, protect your devices and charging adapters from damage, Work better for your phones, tablets and quick charge devices.
- Durable & Flexible : Well Made with Braided Nylon makes it stand out from bunch of cables and provides higher durability and increased flexibility with tangle-free, convenient, lightweight and easily coiled, Perfect substitute for your missing micro USB cord or add more Android chargers in different places.
- Extra Long & Convenient : 6 ft / 2 pack Micro USB Cables are considerate on preparing the cables for where you may stay every day. Long enough to reach limited outlets, 2 cables in 1 pack are convenient for using at Home, workplace, sofa, car, office, hotel, bedroom, and travel.
- What You Get : 2 Pack 6 Feet Nylon Braided Micro USB Cables. This package is sold exclusively by KerrKim, We offer 24-month Breakage Warranty for all charger in case of defective product.
5. Bewinner 2000W High Voltage Induction Heater Module Flyback Driver Heating Board(US Plug 100-240V)
6. Induction Heating Module ZVS Low Voltage Induction Heating Board Driver Heater DIY High Frequency Induction Heating Machine Module 1800W 12V-48V
- This induction heating circuit uses 12-48V low voltage DC power supply, maximum current 40A, the most highest power is 1800W. It can work continuously under the condition of good heat dissipation.
- Input voltage: 12V-48V recommend: 36V above
- Power requirements: less than 12V≥10A , 15V above≥15A
- Maximum power: 1800W
- Maximum current: 40A.
- Product size: 180mm x 90mm x 80mm (Manual measurement, error about 3mm, please understand).
- Heater ring inner: 70mm (Recommended crucible + quartz suit, maximum support of 58mm crucible)
- The ZVS induction heater can be used by DIY players to give smaller players the parts can be treated by quenching, annealing and other heat treatment. You can also be melted with graphite crucible Kim, silver, copper, aluminum and other metal, heating evenly, is fast and very convenient.
Maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect.
12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation.
Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient.
With a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.
It is recommended not to exceed 48V 35A to prevent accidents and damage.
Due to its moderate power, it can be used by DIY players to give smaller players the parts can be treated by quenching, annealing and other heat treatment.
You can also be melted with graphite crucible Kim, Silver, Copper, aluminum and other metal, heating evenly, is fast and very convenient.
1 x PCB board
1 x 48V copper tube
7. Induction Innovations 3/4" Pre-Formed Coil (MD99-611)
Purchase the 3/4″ Pre-Formed Coil (MD99-610), an I.D. heat resistant pre-formed coil for the Mini-Ductor® series.
8. 1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan
- The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
- The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast
- it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster.
- please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out
- please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use (not included).
Product size:Approx.180x90x80mm (please allowed 1-3mm error)
Heater ring inner:70mm (Recommended crucible+quartz suit,maximum support of 58mm crucible)
New style :AC 100-220V Adapter
Old style: Main board Input voltage: 12V-48V recommend: 36V above
Power requirements: less than 12V≥10A , 15V above≥15A
NOTE:New style and Old style shipped by randomly!!!
It doesn’t affect the performance of product.!!!
Maximum power: 1800W
Maximum current: 40A
1 x PCB board
1 x 48V copper tube
1.The power of heating is very large, except that the plate and components are hot, and the heat of copper tube is very high. you can buy a small water pump and 2 meters of rubber hose(inner diameter is 4mm) for build a water cooling system
Please pay attention to using switch power supply, because output voltage is slowly rising, and if the voltage rise to 10V before connected induction heating circuit that will be lead to circuit can’t afford to vibrate caused by lacking voltage,so that the two MOS tube conduction and components will burned
comes with heating circle diameter-60 mm/design voltage-36V,if you use more than 40V Devices shall be used ≥70 mm diameter heating ring, DC 12V water pump use, please use separate power supply voltage regulator module to avoid fan and water pump are burn out
The minimum input is 12V, but it doesn’t mean all 12V power supply available,The module has specific requirements on voltage and current , 12V require current must than 10A ,output power will greatly reduced if the power is too low ,which will lead to two MOS conduction at the same time & burn MOS tube when lower than 12V
9. Tulpock Power Bank Portable Charger | Dual Output 20000mAh External Battery Charging Bank with LCD Display | Compatible with iPhone, Samsung Galaxy Phones and More(Black)
- HIGH CAPACITY: Never run out of power again. Charge your iPhone XS 6+ times, the Galaxy S10 4+ times and the iPad Air 1.5+ times.
- FAST CHARGE: If speed is important, and we know it is when you travel, this is the external battery pack you need. The 20000mAh ensures the pack will have power when you need to get your phones and tablets jump started ASAP.
- ULTRA SAFE: Our power bank delivers worry-free charging wherever you use it. We added muliti securities for your safety – safeguards against overcurrent, short circuit, over-voltage, over-charge, and over-discharge. Our battery pack also delivers cyclic protection.
- LIGHTWEIGHT, COMPACT & THIN: You’ll love the slim profile of the Tulpock wireless power bank charger. It is 14 cm x 6.9 cm x 2.7 cm and weighs only 380 grams – that’s 5.5 in x 2.7 in x 1 in and under 14 ounces.
- WHAT YOU GET: The Tulpock mini charger has an accurate LED display, a 5V 1A output, and a 5V 2A output, a Type C input, and a micro USB input. One Micro USB cable is included. All of this is backed by our superior customer service and a full 12-month warranty.
10. Dental Power Dental Lab Infrared Electronic Sensor Induction Carving Knife Wax Heater
- Safe than from fire and burn. Gain quickly high heat to the wax carver
- Ergonomic design makes it easier to use. Energy efficient operation due to electronic sensor
- It is clean to use due to using the cap which can be replaced
- For safety, Error is appeared and protect the circuits when a carver is inserted in the hole for a long time
- When you work for waxing up, this equipment is able to replace Bunsen burners, Alcohol or Gas Burners. You can gain quickly high heat to the wax carver and it is safe and efficient to use
Power voltage: 220V or 110V 50HZ /60HZ
Rated input power:130w
Standby input power:2w
Gross weight: 0.59KG
By our suggestions above, we hope that you can found Induction Heating Vape for you.Please don’t forget to share your experience by comment in this post. Thank you!