765 reviews analysed
1. Adafruit Electric Heating Pad – 10cm x 5cm [ADA1481]
This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it's just a gigantic resistor. On the other hand, it's flexible, light, and can be wrapped around a project. Originally designed for portable wearable heating pads, this fabric can be used for wearables, weather balloons, diy-bio projects, thermal cycling for materials testing, etc.
The temperature reached varies with voltage. This piece is ~ 10cm long, so look in the spec sheets in the Technical Details tab for a table of voltage/current/temperature outputs. You could PWM it with a power N-channel transistor if you want to have finer temperature control.
Electric Heating Pad – 10cm x 5cm ( 4:38 )
2. Adafrui 4308 Electric Heating Pad – 14cm x 5cm
This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it’s just a gigantic resistor. On the other hand, it’s flexible, light, and can be wrapped around a project. Originally designed for portable wearable heating pads, this fabric can be used for wearables, weather balloons, DIY-bio projects, thermal cycling for materials testing, etc. The temperature reached varies with voltage. Note that while the data/spec sheet says 15cm, its more like ~14cm long. Check the spec sheets in the Technical Details tab for a table of voltage/current/temperature outputs.
3. Adafruit 1335 Peltier Thermoelectric Cooler Module with Heat Sink Assembly, 12 Volt, 5 Amp
4. 100x100x1.5mm Thermal Pad, 6W/m.k Thermal Conductivity/Non Conductive/Insulation/Heat Resistance/High Temperature Resistance/Heat Sink Silicone Sheet Pads for Laptop Heatsink/GPU/CPU/LED Cooler
- ✔Perfect To Filled Contact Surfaces Gap , Lmproves Heat Transfer Between CPU/Chipset/Motherboard/Module And Heatsink.
- ✔Good Cooling, Insulation, Thermal Conductivity, Wear Resistant, Non Conductive, Antistatic,Fire Retardant, Heat Resistance, High Temperature Resistance, Compression, Buffering, Etc.
- ✔Soft A Little Sticky, It Can Be Arbitrarily Cut Size,Easy To Install, Replaces Traditional Heatsink Compound Grease Paste.
- ✔ In -40 ℃ -200 ℃ Range Does Not Melt, Good Stability, No Toxic, Odorless,No Corrosion,No Stimulation,No Damage To Metal Materials.
- ✔Thermal Silicone Pad Has A Thermal Conductivity Of 6 W/mk, It Is The Most Conductive Thermal Pad On The Market,Thickness Is Widely Used, But It Is Not Very Sticky, It Can Be Glued With Thermal Double Sided Tape, Please Search (B075FRPXQ5), This Is The Thermal Adhesive Tape We Sell, You Can Apply These Two Different Products Together To Your Electronic Device, Realize The Best Thermal Conductivity.
thermal pad has 6.0 W/m K Thermal Conductivity, Used to fill the gap between the heating element and the Heatsink, Achieve the best cooling effect,
At the same time, the thermal pad also has Insulation, Non-conductive, wear-resistant, fire-retardant, compression, buffering, no damage to metal materials, etc effect.
Why use thermal silicone Pad ?
1) The main purpose of the choice of Thermal Pad is to reduce the heat source surface and the heat dissipation device contact surface between the contact thermal resistance,
Thermal conductivity of silicone Pad can be good filling the gap between the contact surface;
2) because the air is hot bad conductor, will seriously hinder the heat transfer between the contact surface,
And in the heat source and the radiator between the installation of thermal silica Pad can be out of the air contact surface;
3) with thermal silicone Pad supplement, you can make the heat source and the heat sink between the contact surface better full contact,
Truly face to face contact in the temperature of the reaction can be achieved as small as possible temperature difference.
LED industry, automotive electronics industry, power industry, PDP/LED flat-panel TV,
communications industry, Industrial industry, household electrical appliance industry.
electronic products, motherboard, motor, external pad and foot pad, electronic, appliances,high power LED lighting,Car machine,
power devices, automotive electronic modules (engine scrubber) Power modules,
high power power supplies, computer host (CPU, GPU, USICS, RDRAMTM, CD-ROM, IGPT module, hard drives) ,laptop and any electronic equipment needing to be filled with heat dissipation
1* 100x100x1.5 mm Thermal Pad
5. Thermal Double Sided Adhesive Tape 40mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability
- HPFIX thermal double sided adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
- Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
- HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
- Thermal tape is widely used for high power LED,High power power supply, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip, high voltage, display, computer, Video Card RAM, DDR Memory Modules, SSD drives,solar, new energy heating power.
- Thermal conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).
Dimension: 40mm x 25m
Reinforcement Carrier : Fiberglass Mesh
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Heat Resistance: 120°C (long time), 180°C ( short time)
Applicable temperature range:-30~+120 °C
Electronics Components: IC、CPU 、MOS …….
LED、M/B、P/S 、Heat Sink 、LCD -TV 、Notebook PC 、PC、Telecom Device、Wireless Hub
DDR Module 、 DVD Applications 、 Hand-set Application
★ Good adhesion (Acrylic PSA)
★ Very good thermal conductivity
★ Soft and compressibility
★ Easy to assemble
★ Long lifetime working normal temperature(80-120℃ ) can work for a minimum of 5 years
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it’s little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
1 Roll Thermal Conductive Double-sided Tape
6. KKmoon DIY Kit Thermoelectric Peltier Cooler Refrigeration Cooling System Heat Sink Conduction Module + 2 Fans + 2 TEC1-12706
- Great DIY Radiator Kit for electronic enthusiasts in semiconductor cooling applications.
- \Adopt 2pcs TEC1-12706 semiconductor chilling plate, good quality for use.
- Complete sealed structure, isolating the moisture in the air.
- Higher reliability than others.
- Lightweight and mini in size, easy to install.
1. The conduction cool module can frost when the temperature is under -25°C.
2. TEC1-12706: one side with words is the refrigeration side, the other side is heat dissipation side.
3. Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier.
4. The DC power is not included in this kit, please prepare it by yourself.
Semiconductor Chilling Plate: TEC1-12706
Size: 40 * 40 * 3.75mm
Internal Resistance: 2.1~2.4Ω
Max. Temperature Difference: 67°C Above
Rated Voltage: 12V(Vmax. 15V, Starting Current 5.8A)
Working Current: Imax.=4~4.6A(Rated 12V)
Refrigeration Power: Max. 50~60W
Working Environment: -55~83°C
Sealing Process: Standard 704 silicon rubber sealing all sides
Fan: DC 12V
Conduction Module: 60 * 45 * 21mm
Water Block Size: 40 * 40 * 12mm
Fan Size: 40 * 40 * 10mm
Package Size: 12 * 9 * 7cm / 4.72 * 3.54 * 2.75in
Package Weight: 284g / 10.02oz
2 * Conduction Module
1 * Water Block
2 * TEC1-12706
2 * Thermal Grease
2 * Fan
1 * Base Board
1 * Pack of Screws
7. 25Mx20mmx0.15mm Thermal Adhesive Tape,High Performance Thermally Double Side Tapes Cooling Pad Apply to Heatsink,LED,IGBT, IC Chip,Computer CPU,GPU,Modules,MOS Tube,SSD Drives
- ✔Aikenuo thermal adhesive Tape is a simple and practical tape, easy to install, easy to use, easy to eliminate.
- ✔Aikenuo thermal tape with the high thermal conductivity, insulation, strong stickiness, softness, compression.
- ✔Widely used in most electronic devices,High tensile strength and strong adhesion hold the device firmly in place, to achieve the most effective thermal dissipation.
- ✔Used for fill the uneven surface,Can be tightly and firmly fit the heat source devices and heat sink,heat sink and IC chip bonding, high power LED and heat aluminum bonding.
- ✔Thermal double-sided tape has a thermal conductivity of only 1.5 W/mk, Can’t provide good cooling results, If you need high thermal conductivity products, Please search (B075JDW2RB), This is our highest thermal conductivity product, Its thermal conductivity is 6.0 W/mk, It is the highest specification thermal pad on the market, but it is not very sticky, You can use these two different items together.Our products also include Silver Thermal Compound Grease Paste.
8. 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cooling System Heat Sink Conduction Module DIY Kit with Fan for Air Cooling Dehumidification System, Semiconductor Refrigeration Learning
- Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory, etc
- Simple operation, good practicability
- Cooling quickly, outstanding effect
- Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques
Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory, etc. Simple operation, good practicability. Cooling quickly, outstanding effect. Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.
Working current: 6A
Working voltage: 12V
Can also use 12V 10A power supply, frozen fast.
Size: 175 * 100 * 98 mm/6.88 * 3.93 * 3.85inch
1 x Semiconductor Refrigeration
9. Kuman 100pcs WS2812B 5050 Addressable SMD Smart rgb led Strip Great Pixel LED lights for Arduino 5V DC Single 1-led LED Module Pixels Color Light littlergb LEDs Lampon Black Heat Sink PCB Board
- Works great with Adafruit NeoPixel Library ,ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK, FastLED library and Raspberry Pi . The RGB LED breadboard is not Adafruit brand. It is Kuman brand
- built-inThe ultra bright ws2812b APA102smart full-color LED pixel is individually addressable. It has 256 brightness display and full 24-bit (16,777,216) color display. You can set to any color or animation
- Awesome price for the LEDs. Easy to solder leads onto the pre-tinned pads，Have any other components need pre-soldered to the boards，put on a small PCB board that allows you to solder it in whatever configuration you want
- The litlle RGB LED is easy to program, because the addressable IC is built-in the 5050SMD and it makes this led module to light up each individual 5050SMD at your wish
- Very bright great little pixels for projects. Very handy to have around for all those little ideas you come up with.The arduino library and code are easy to use and manipulate.we can offer tutorial for you by Email via Amazon.
We are professional factory on making all electronics components based on Arduino and Raspberry Pi. And we also have professional engineer team to offer you tutorials which you can start from beginning. We are always caring about each customer’s experience and must improve the product function details at your suggestion.
5050 RGB LED Pixel with Integrated WS2812B Driver IC. The modules come as a 10×10 grid and need to be snapped apart. There are no traces connecting the modules It works almost the same as NeoPixel and has superior quality. if you want to save money ,the product will be your choice.
Model: WS2812 pixel board
light source: SMD 5050 RGB
IC Model: WS2812B
the gray level: 256
Beam angle: 120 °
Power: 0.3W ± 0.01%
FPCB board color: black
Color:full color, can be adjusted by the controller as follows: white, red, blue, green, yellow, etc.
None of the LEDS are connected through the PCB. So you need to solder them based on your requirement. There are 6 solder points on the back of LEDs. Soldering can be challenging because of the size but also because these little guys can burn out if the soldering tip is left on the contact too long. Arduino is not included.
100x black WS2812B LED mounted on PCB Board
10. LLPT Double Sided Thermal Conductive Strong Adhesive Tape 1.6 Inches x 108 Feet for Electronic Components LED Strips Heat Sinks(TC129)
- APPLICATION: LLPT 2-sided thermal adhesive tape meets ASTM D5470 with high coefficient for thermal conduction on electronic components, like controller, semiconductor, MOS, IC, GBT, SSD, computer CPU, GPU, RAM & DDR memory modules and so on
- easy mountings to replace screws for electronic components to increase the work efficiency, printing industry, filling gap on uneven surfaces of electronic components for tight fit, holding LED strips and etc.
- MATERIAL: LLPT double sided thermal conductive tape is a combination of fiber glass that fills conductive ceramic powder for high efficiency and flexibility of thermal conduction & insulation
- coated with strong Acrylic adhesive, removable, repositionable and residue free for easy mountings to save time and work better on electronic.
- EASY USE: Ideal to mount heat sink to IC chip, fit parts to heating source devices and hold LED strips
- clean the dust before application and cut the size as needed, stick and compress the tape, then take off the blue backing film liner by hand to mount another part. The removable property is to allow reposition after application without any damages to components. Avoid finger prints on adhesive layer for strong holding.
- FEATURE: LLPT Thermal Conductive tape has high thermal conductivity, insulation, strong adhesive, flexibility, compression, high tensile strength to hold the components firmly in place, have the most effective thermal dissipation and widely used in electronic devices.
- LLP-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price with great packing protection during transition. Search LLPT-TAPES on Amazon for other tapes like PET Repair Tape, Yellow Woodworking Tape, Aluminum Foil Tape, PE Foam Tape, Black/Gray/Clear Acrylic Tape and Gaffer Tape.
WHY CHOOSE LLP-TAPES(Brand Registered)?
LLPT ensures fast delivery and hassle free refund if you are not satisfied with the performance of our product because we have unsurpassed quality control per ISO9001 to all items before leaving factory to Amazon.
– Coated with strong Acrylic adhesive on both sides.
– High thermal conductivity, flexibility, insulation and long life support.
– Widely used in LED lighting, automotive electronics, household electrical appliances, consumer electronic devices, power devices, PDP/LED TV, communication, computer/laptop like CPU, GPU, USICS, RDRAMTM, CD-ROM, IGPT module & hard drives.
– Work temperature range: -20°C to 120°C.
– Extra thickness, 12 mil; appropriate heating low temperature will increase greatly on stability and durability in the area of adhesive.
– Meets ASTM D5470, industrial grade especially for electronic industry.
– White color with blue backing liner protective film.
– Packed in single PE bag.
– Available Size: 1.2” width x 108 feet long and 1.6” width x 108 feet long.
– Width: 1.2” and 1.6” are available.
– Length: 108 feet.
– Thickness: 12 mil with 2.7 mil blue backing liner.
– Adhesive Strength: 5lbs/square inch.
– Adhesion: >20N/1.2 inch width; >25N/1.6 inch width.
– Stripping Strength: PSTC-101, >17N.
– Breakdown Voltage: 6KVAC.
– Thermal Coefficient: 1.5 W/M-K.
– Work Temperature: -20°C to 120°C.
– Thermal Impedance: 0.3°C In 2/W.
– Tension: PSTC-7, >48 HRS.
– Material: Fiberglass with conductive ceramic powder.
NOTE: KEEP THE ADHESIVE SURFACE CLEAN & DRY, AVOID FINGER PRINTS FOR LONG DURABILITY AND COMRESS THE PARTS AFTER MOUNTING.:
By our suggestions above, we hope that you can found Adafruit Heating Pad for you.Please don’t forget to share your experience by comment in this post. Thank you!