Top 10 75 Hp Motor

0

We spent many hours on research to finding 7.5 hp motor, reading product features, product specifications for this guide. For those of you who wish to the best 7.5 hp motor, you should not miss this article. 7.5 hp motor coming in a variety of types but also different price range. The following is the top 10 7.5 hp motor by our suggestions

819 reviews analysed

1. NEW WEG INDUSTRIAL GRADE 7.5HP COMPRESSOR DUTY MOTOR, 230V, 1760RPM, 215T/213T FRAME, 1 3/8 SHAFT DIAMETER, 31.3 FLA

NEW WEG INDUSTRIAL GRADE 7.5HP COMPRESSOR DUTY MOTOR, 230V, 1760RPM, 215T/213T FRAME, 1 3/8 SHAFT DIAMETER, 31.3 FLA

Feature

Description

FULL INDUSTRIAL GRADE 7.5 HP – 1 PHASE – 213T / 215T FRAME – 1760 RPM – 230VAC – 1 3/8″ SHAFT DIAMETER ELECTRIC MOTOR FOR BELT DRIVEN AIR COMPRESSORS THIS MOTOR ROTATES CCW (COUNTER CLOCK WISE) WHEN VIEWED FROM SHAFT END. MAKE SURE YOUR EXISTING PUMP APPLICATION REQUIRES A MOTOR THAT ROTATES CCW FROM THE SHAFT END. CONTINUOUS RUN COMPRESSOR DUTY MOTOR. ODP (OPEN DRIP PROOF FOR DRY INDOOR ENVIRONMENTS) 31.3 AMPS AT 230VAC, 40AMP MAGNETIC STARTER IS REQUIRED TO EFFICIENTLY START AND PROVIDE PROPER MOTOR PROTECTION, PROFESSIONAL INSTALLATION REQUIRED. FOR DIMENSIONAL DATA, PLEASE SEE OUR ATTACHED PICS THIS 132 LB MOTOR SHIPS BY MOTOR FREIGHT TRUCK. A VALID PHONE NUMBER WILL BE REQUIRED IN ORDER TO SET UP A DELIVERY TIME OF THE MOTOR. PLEASE MAKE SURE YOUR PHONE NUMBER IS LISTED WITH EBAY. Technical Info: Horsepower: 7.5 HP Amperage: 31.3 FLA (FULL LOAD AMPS) AT 230V Service Factor Amperage: 35.5 SFA Phase: One / Single Phase Voltage: 208 – 230VAC ( NOT SUITED FOR INCOMING VOLTAGE THAT IS BELOW 208V) RPM: 1760 Frame: 213/5T ( 213T / 215T ) Shaft Diameter: 1 3/8″ Keyed shaft Shaft Length: 3.30″ SHAFT LENGTH Rotation: CCW WHEN VIEWED FROM SHAFT END (THIS MOTOR IS NOT REVERSIBLE) Frequency: 60hz Service Factor: 1.15 Insulation: Class F Enclosure: ODP / Open Drip Proof ( FOR USE IN DRY INDOOR ENVIRONMENTS) Weight: 132 lbs Warranty: 1 Year WIRING SCHEMATIC FOR 230V SHOWN ON ATTACHED PIC OF MOTOR NAMEPLATE.

2. NEW WEG 7.5HP HEAVY DUTY AIR COMPRESSOR ELECTRIC MOTOR 3450 RPM, 1 PHASE, 184T FRAME, 230VOLT, CAST IRON FRAME

NEW WEG 7.5HP HEAVY DUTY AIR COMPRESSOR ELECTRIC MOTOR 3450 RPM, 1 PHASE, 184T FRAME, 230VOLT, CAST IRON FRAME

Feature

Description

BRAND NEW WEG 7.5 HORSEPOWER HIGH EFFICIENCY NEMA PREMIUM ELECTRIC MOTOR. THIS MOTOR SITS ON A 184T FRAME AND SPINS 3510 RPM. 1 1/8″ DIAMETER KEYED SHAFT, 208-230VOLT SINGLE PHASE. THIS 115 LB HEAVY DUTY MOTOR REPLACES INGERSOL RAND AND MANY OTHER COMPRESSOR DUTY MOTOR TYPES. THIS IS A CAPACITOR START AND RUN COMPRESSOR DUTY MOTOR WITH CAST IRON CONSTRUCTION. HP: 7.5 AMPERAGE: ( 33.4A @ 208VAC ) ( 30.0A @ 230VAC ) SERVICE FACTOR: 1.25 PHASE: SINGLE PHASE ( 2 POLE ) 60HZ SHAFT: 1 1/8″ SHAFT DIAMETER ( 2.75″ TOTAL SHAFT LENGTH ) VOLTAGE: 208-240 VOLTS. (NOT RECOMMENDED ON VOLTAGES LESS THAN 208 VOLT) ROTATION: CCW ( COUNTER CLOCKWISE ) LOOKING FROM THE SHAFT END ENCLOSURE TYPE: ODP (OPEN DRIP PROOF) ONLY RATED FOR INDOOR APPLICATIONS RPM: 3510 (WILL REPLACE 3450, 3490, 3550 AND ANY OTHER RPM LESS THAN 5% OF 3600RPM) FRAME: 184T (ALSO REPLACES 182T FRAME) INSULATION: CLASS F TORQUE: 11.1 LB. FT. EFFICIENCY (100%): 85.0 POWER FACTOR (100%): 0.95 DIMENSIONS: SEE ATTACHED PIC FOR ALL NEMA RATED DIMENSIONS WARRANTY: 18 MONTH RECOMMENDED TO BE USED WITH A MAGNETIC MOTOR STARTER RATED MINIMUM 40AMPS. VISIT OUR EBAY STORE FOR A WIDE VARIETY OF MOTOR STARTERS. FEEL FREE TO CONTACT US WITH ANY QUESTIONS RELATING TO OUR PRODUCTS. WE WILL GLADLY ASSIST YOU WITH YOUR APPLICATION QUESTIONS.

3. MAGNETIC MOTOR STARTER CONTROL SINGLE PHASE 7.5 HP 220/240V 30-40A

MAGNETIC MOTOR STARTER CONTROL SINGLE PHASE 7.5 HP 220/240V 30-40A

Feature

4. Vector Control CNC VFD Variable Frequency Drive Controller Inverter Converter 220V 7.5KW 10HP for Motor Speed Control HUANYANG GT-Series (220V, 7.5KW)

Vector Control CNC VFD Variable Frequency Drive Controller Inverter Converter 220V 7.5KW 10HP for Motor Speed Control HUANYANG GT-Series (220V, 7.5KW)

Feature

5. 7.5 HP Farm Duty Single Phase Electric Motor 1800 RPM 215TZ Frame TEFC Enclosure

7.5 HP Farm Duty Single Phase Electric Motor 1800 RPM 215TZ Frame TEFC Enclosure

Feature

Description

Brand new 7.5 horsepower, single phase farm duty, TEFC electric motor with rigid base. Worldwide Electric designs and manufactures motors with quality and reliability in mind. This motor features Class F insulation, fan cooling, a 1.15 service factor, a TEFC / IP55 enclosure, and a manual overload. Designed for 60Hz and is a 215TZ frame. SPECIFICATIONS 7.5 Horsepower Single Phase TEFC / IP55 Fully Enclosed Poles: 4 215TZ Frame Service Factor 1.15 Class F Insulation 208-230 Volt 1800 RPM Fan Cooled Worldwide Electric Brand Max Temp: 40 Degrees C Weight Approx: 134 Lbs.

6. ECCPP 7.5 HP Single Phase Air Compressor Electric Motor 184T Frame 60 HZ Frequency 3450 RPM 33.4-29.6 A 1-1/8" Keyed shaft

ECCPP 7.5 HP Single Phase Air Compressor Electric Motor 184T Frame 60 HZ Frequency 3450 RPM 33.4-29.6 A 1-1/8" Keyed shaft

Feature

Description

Specifications:
Frame: 184T               
Phase: One/ Single Phase                 
Horsepower: 7.5 HP                                  
Voltage: 208V-230 V      
Amperage: 33.4-29.6A                       
RPM: 3450 RPM
Frequency: 60 HZ        
Shaft Diameter: 1-1/8″ Keyed shaft
Shaft Length: 2-3/4″   
ENC: ODP          
ROT: CW/CCW  

Package Including:
Set of 1 air compressor electric motor

7. CNC 7.5kw 7500w 220v 10HP 34a 10hp Variable Frequency Drive Inverter VFD for Spindle Motor Speed Control

CNC 7.5kw 7500w 220v 10HP 34a 10hp Variable Frequency Drive Inverter VFD for Spindle Motor Speed Control

Feature

Description

Introduction

This VFD can be used for constant torque loads(such as hard starting:Air conpressor,HVAC units) and variable torque loads(such as pumps,fans,etc) It can be used as a motor speed control and a phase converter.The inpute for this VFD is 1 or 3 phase as you like.You can control different speed when you use this VFD.Most of our customers bought this VFD from us to use for:Lathes,Mill,car Hoists,Pumps&conveyors,etc.This item use sine wave PWN(SPWM) for the control system and performace excellently.

Technical Parameters

Input voltage:220V±15%(we also stock 110V and 380V+/-15%,please contact us for item stock)
Input Frequency: 48 to 63 Hz
Output Frequency: 0 to 400 Hz
Input Phase: 1 or 3 phase as you like
Output Phase: 3 phase

Features

1.Our item adopts the Japan Mitsubish chip;
2.PID control; advanced calculous PID closed-loop arithmetic, quick responding speed and high suitability;
3.Easy PLC function can realize 16 legs of speed and inverter control function;
4.RS485 communication port, adopting standard international MODBUS main circuit control;
5.With extremely strong anti-jamming capability;
6.Low output ratting torque, low speed running ability;
7.Carrier adjustable by 16KHZ, completely soundless working environment;
8.Broad voltage working area;
9.Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
10.Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes

8. 7.5 HP Single Phase Electric Compressor Motor 213T 3520 RPM WEG Replaces L1509T

7.5 HP Single Phase Electric Compressor Motor 213T 3520 RPM WEG Replaces L1509T

Feature

Description

7.5 HP 213/5T Single Phase 3520 RPM WEG Electric Motor This listing is for a brand new WEG 7.5 horsepower air compressor motor model number Z00736ES1071019, this motor is 230 volt, 28.30 AMPS, 60 Hz, 213/5T Frame, single phase, 1-3/8″ diameter shaft, and 3520 RPM. This motor is a great replacement for the Baldor L1509T and is specifically designed for use with air compressors to meet start up load/torque specifications. This can replace a higher rpm motor, you will just have to use a larger pulley to make up the RPMs on your compressor. SpecificationsFrame: 213/5TOutput: 7.5 HPFrequency: 60 HzRated Speed: 3520 RPMRated Voltage: 230 VoltsRated Current: 28.30 AmpsService Factor: 1.15Ambient Temperature: -20°C to +40°CEnclosure: ODPRotation: ReversibleApprox. Weight: 126 lbs.Shaft Diameter: 1-3/8″Shaft Length: 3-3/8″ This motor has a 1-year limited manufacturer’s warranty.

9. 7.5 HP Air Compressor Duty Electric Motor 215T Frame 1760 RPM Single Phase WEG 00718OS1CCD215T

7.5 HP Air Compressor Duty Electric Motor 215T Frame 1760 RPM Single Phase WEG 00718OS1CCD215T

Feature

Description

7.5 HP 215T Single Phase 1760 RPM WEG Electric Motor This listing is for a brand new WEG 7.5 horsepower air compressor motor model number 00718OS1CCD215T, this motor is 208-230 volt, 33.00-31.40 AMPS, 60 Hz, 215TFrame, single phase, 1-3/8″ diameter shaft, and 1760 RPM. This motor is specifically designed for use with air compressors to meet start up load / torque specifications. This can replace a higher rpm motor, you will just have to use a larger pulley to make up the RPMs on your compressor. If you have any questions about this motor or if it will work as a replacement on your compressor feel free to contact us. Specifications Frame: 215T Output: 7.5 HP Frequency: 60 Hz Rated Speed: 1760 RPM Rated Voltage: 208-230 Volts Rated Current: 33.00-31.40 Amps Service Factor: 1.15 (1.00 at 208V) Ambient Temperature: -20°C to +40°C Enclosure: ODP Rotation: Counter Clockwise Approx. Weight: 98lbs Shaft Diameter: 1-3/8″ Shaft Length: 3-1/4″ “THIS MOTOR ONLY SHIPS TO THE CONTINENTAL 48 UNITED STATES” This motor has a 1 year limited manufacturer’s warranty and also a 30 day warranty directly through Industrial Equipment Expert

10. shihlin 7.5 HP Single 1 Phase Magnetic Starter Motor Control New

shihlin 7.5 HP Single 1 Phase Magnetic Starter Motor Control New

Feature

Description

7.5 HP Single Phase Magnetic Starter with On/Off Buttons Brand new 7.5 horsepower single phase 220-240 volt magnetic starter with a manual on & off push button control mounted on the front of the steel starter housing. This is a great quality starter with a built in overload which is adjustable from 32-48 amps. Also has a manual reset button that can be switched to auto reset. The steel housing has four 3/4″punch out holes for incoming and outgoing wires. Also included are three rubber surround grommets for the 3/4″ holes to protect the wires if needed. Starter comes with basic wiring instructions. PROFESSIONAL INSTALLATION IS REQUIRED Specifications:Dimensions H x W x D: 9″ x 5-1/2″ x 5-1/2″7.5 HP220-240 VoltSingle Phase (Works w/ 208 Volt)Amp Rating: 32-48 Amps / AdjustableEquipped With Push Button “On/Off” This starter is designed for bandsaws, table saws, augers and other equipment that needs a starter with an on and off button. This starter is not designed to be used on a air compressor because it wont wire in with the pressure switch due to the on and off button. If you are wanting a starter for a air compressor use our version without the on and off button. Due to this being an electrical item that can be installed incorrectly there is no warranty on this item after installation.

Conclusion

By our suggestions above, we hope that you can found 75 Hp Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general